Yes, as far as I know, when doing 3m measurements you increase the limits by +10dB (as long as the limits are refered to 10m measuements),
Amund -----Opprinnelig melding----- Fra: [email protected] [mailto:[email protected]]På vegne av Stuart Lopata Sendt: 30. oktober 2001 16:07 Til: emc Emne: EN 55022 limits The radiated limits are stated for 10 meters but our measurements are at 3 meters. Is it ok to use 3 meter data and what should the new limits be (may be 10 dB higher)? Thanks, Stuart Lopata ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
