Bonjour de Montreal, It all depends of the procedure you used for your product :
If it is a Class B digital device using the, now obsolete, certification process, you have to put at a minimum the FCC ID of your granted certificate. The only way it could be used now is by the mean of a permissive change procedure. If it is a Class B digital device using the Declaration of Conformity (DOC) procedure, then at a minimum the FCC logo (see attachment) has to be on the device, all other information in the user’s manual. If it is a Class A digital device, using a verification procedure, this is where you have a problem because you don’t have an FCC ID and the FCC logo is reserved to the DOCs, my suggestion in that case would be to state in writing, FCC Class A and put all the rest of the information in the user’s manual. Hope this help, Best regards, ====================================================== Benoit Nadeau, ing., M.ing. (P.Eng., M.Eng) Gerant du Groupe Conformite (Conformity Group Manager) Matrox ====================================================== Tel : (514) 822-6000 (2475) Fax : (514) 822-6275 mailto:[email protected] http://www.matrox.com ====================================================== President / Chairman 2001 IEEE International Symposium on Electromagnetic Compatibility mailto:[email protected] http://www.2001emcmtl.org -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of [email protected] Sent: Wednesday, October 24, 2001 05:17 To: [email protected]; [email protected] Subject: Too small to print Fcc Verification label!!! Hi EMC members. I have a question about Fcc Label. This model is too small to insert Fcc verification statement on device. This is Compactflash memory card. I read Fcc Part 15. rules but I couldn't understand meaning. On Section 15.19 said "alternatively,shall be placed on the container in which the devide is marketed.However,the FCC identifier or the unique identifier,as appropriate must be displayed on the device." I confuse from 'However...' In conclusion,I'd like to know what can I do in case device is too small to print Fcc verification statement on device. Can I print only Fcc character on label? If you have any idea,mail to me. Best regards. Tommy ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
<<attachment: FCC_logo.jpg>>
