The difference in duty cycle factors seems to be based on taking the power based on the average voltage (rms power) versus converting voltage to power and then taking the average. Thus, the average power is half of the rms power. It is as simple as that, just do the math. The question is, which one do we use in the standard?
P(Vave) ~ 20log() Pave ~ 10log() Sincerely, Stuart Lopata ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
