Can someone provide me a clarification of what the following DO-160D change
1 section 20 test frequency exclusion (para 20.3 d.)?
This test is not intended to evaluate the normal MOPS RF performance
.... NOR IS THE TEST INTENDED TO EVALUATE RECEIVER PERFORMANCE IN THE
PRESENCE OF ANY INTERFERING SIGNAL INDUCED OR COUPLED INTO THE RECEIVER'S
RF INPUT PORT(S).
Does this mean that the RF ports are excluded from the Section 20 CS test
or should it have said " ANY INBAND INTERFERING SIGNAL" implying that the
test applies except within 5% of the tuned frequency as discussed in the
next paragraph?
Susan Beard
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
No longer online until our new server is brought online and the old
messages are imported into the new server.
