Dear all, The table as posted on the web site was very impressive. However there is one or two things that is bugging me. I was aware that the EMC marking in Japan was not mandatory but there are standards set by VCCI.
Can someone enlighten me on how (if ) it is related to the PSE marking? Thanks in advance. Tim Foo, E-mail: [email protected] ECE, School of Engineering, http://www.np.edu.sg/ece/ Tel: + 65 460 6143 Ngee Ann Polytechnic, Fax: + 65 467 1730 535 Clementi Road, Singapore 599489 "Allen, John" <[email protected]> Sent by: [email protected] 09/20/01 03:20 PM Please respond to "Allen, John" Hi Folks I have just come across a very useful page on the NEMKO UK Ltd site, at: http://www.nemko.ltd.uk/cert/direct.htm The site is essentially advertising for NEMKO services but has tables which give thumbnail sketches of the requirements for electrical and electronic equipment approvals (including the namesof the organisations and illustrations of their approval marks), including EMC but not R&TTE, in the following countries: <snip> ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
