Every manufacturer builds generators differently -- for modeling purposes, each is supposed to look like a storage capacitor dumped through a network consisting of both series and parallel resistors and some series inductance. The parallel resistance components determine the open-circuit voltage waveform; the series components determine the short-circuit current waveform. As long as the generator appears to be a 2 ohm source, the manufacturers are free to use any descrete components they want in order to meet the standards requirements.
Another issue is that to get the correct waveform out of coupler/decouplers, the internal components of the generator are sometimes modified since the coupler/decoupler itself becomes part of the circuit that defines the waveform.... Tell me what you're trying to achieve by the modeling and perhaps I can help (at least with KeyTek stuff.....) Michael Hopkins Thermo KeyTek ----- Original Message ----- From: "JENKINS, JEFF" <[email protected]> To: <[email protected]> Sent: Thursday, September 13, 2001 6:12 PM Subject: surge generator circuit values > > Anybody out there know the values of the components that make up the > combination wave generator in EN61000-4-5? A simplified circuit diagram is > shown, and we would like to model it in a circuit simulator. > > Jeff Jenkins > Advanced Energy Industries, Inc. > Fort Collins, CO > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > No longer online until our new server is brought online and the old messages are imported into the new server. > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
