I currently have a motor controller from an outside vendor which lists compliance to the EN61800-3:1996 requirements. I'm attempting to correlate the frequency ranges evaluated and the applicable limits tested under EN61800-3 to the equivalent MIL-STD-461 requirements.
According to the manufacturer the environments selected were as follows: Immunity: Second environment (Industrial environment) Emissions: First environment (Domestic environment) With respect to the immunity requirements, can someone please tell me what immunity tests (radiated immunity, ESD, EFT, etc.) are associated with the standard and a brief table showing the requirements (frequency ranges, levels, etc.)? With respect to the emissions requirements, can someone please tell me what the limit levels are (including units) and the frequency range evaluated? Confirming that the EN61800 requirements are similar to the EN55024 requirements would be very helpful as well. Regards, Michael EMI/EMC Sr. Systems Engineer Lockheed Martin Naval Electronics & Surveillance Systems P.O. Box 4840, EP5-D5, MD45 Syracuse, New York 13221 Email: [email protected] <mailto:[email protected]> ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
