CISPR 22 allows either VCP or HCP, it's your choice. Ari Honkala Nokia
> -----Original Message----- > From: ext Cook, Jack [mailto:[email protected]] > Sent: Wednesday, August 22, 2001 5:12 AM > To: [email protected] > Subject: RE: Vertical Ground Plane > > > > Joe, > > Ref. ANSI C63.4: 1992, para. 5.2.2. The VGP is not required > for a floor > standing EUT. And on an open area test site, it's optional > for a tabletop > EUT (but preferred in case of dispute). Has this changed? > > Sorry, this doesn't answer your question re CISPR 16 but I felt a > clarification was appropriate regarding the ANSI requirement > - if it hasn't > been changed in the new edition. > > Jack Cook > Xerox EMC > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] > Sent: Tuesday, August 21, 2001 5:54 PM > To: [email protected] > Subject: Vertical Ground Plane > > > > ANSI 63.4 clearly specifies the requirements for a vertical > ground plane > when performing conducted emissions measurements. I was > unable to find > such clarifications when reviewing CISPR 16. > > Do the CISPR standards require a vertical ground plane for conducted > emissions? If so, where is this requirement specified? > > Your assistance is appreciated. > > Joe Martin > Applied Biosystems > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > No longer online until our new server is brought online > and the old messages are imported into the new server. > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
