Dear Colleagues,
Teradyne is seeking the services of a Principal Mechanical Engineer, who is
also a licensed PE to provide the guidance and leadership required to
complete a thorough product review for Risk Assessment.
This individual should possess the following skill sets and/or experiences.
1. ) Fault Tree Analysis (FTA)
2.) Risk Assessments
3.) Failure Mode Effects Analysis (FMEA)
4.) Reliability and /or Quality Assurance
5.) Incident Investigation Experiences
6.) Finite Element Analysis (FEA)
7.) Failure Analysis
Your recommendations would be most appreciated.
If questions, please contact me ASAP.
Best Regards, Paul J Smith
Teradyne, Inc.,
179 Lincoln Street, MS-L22-19
Boston, MA 02111
[email protected]
Voice 617-422-2997
Fax 603-843-7526
Pager: 1-800-skypage, PIN 1105510 ( USA only)
cell 617-549-1308
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.rcic.com/ click on "Virtual Conference Hall,"
