IEC 61000-4-3 1995+A1:1998 covers 800-960 MHz and 1.4 to 2.0 GHz for protection from digital Radio telephones
-----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Tuesday, August 07, 2001 7:16 AM To: [email protected] Subject: ETSI EMC Stadard The final draft of the proposed revision of ETSI EN 301 489-1 is in the voting stage. This standard sets the emissions and immunity requirements for most all transmitters. A major change has been made to the radiated immunity requirements by adding the frequencies between 1400 MHz and 2000 MHz. I was told that this change is being driven by CISPR and may be based upon a CISPR standard. Does anyone have any information in this regard? Richard Woods ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall," ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
