Doug,

You meant to say FCC exempt.  
Also, keep in mind that if equipment includes any additional functions other
than measurement than it shall be tested.

Vitaly  Gorodetsky
Compliance Consultant                   Direct: (818) 678-3840
                                        Main:   (818) 718-6300
                                        FAX:    (818) 678-3740
                                        e-mail: [email protected]
<mailto:[email protected]>         

The suitability of this information for making decision is solely with the
reader


                -----Original Message-----
                From:   Doug McKean [mailto:[email protected]]
                Sent:   Tuesday, July 31, 2001 11:58 AM
                To:     EMC-PSTC Discussion Group
                Subject:        Test Equipment ... 


                Why or what is the reasoning behind test equipment 
                being exempt from all sorts of testing that's required 
                for other pieces of equipment? 

                - Doug McKean 



                -------------------------------------------
                This message is from the IEEE EMC Society Product Safety
                Technical Committee emc-pstc discussion list.

                Visit our web site at:
http://www.ewh.ieee.org/soc/emcs/pstc/

                To cancel your subscription, send mail to:
                     [email protected]
                with the single line:
                     unsubscribe emc-pstc

                For help, send mail to the list administrators:
                     Michael Garretson:        [email protected]
                     Dave Heald                [email protected]

                For policy questions, send mail to:
                     Richard Nute:           [email protected]
                     Jim Bacher:             [email protected]

                All emc-pstc postings are archived and searchable on the web
at:
                    http://www.rcic.com/      click on "Virtual Conference
Hall,"

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Michael Garretson:        [email protected]
     Dave Heald                [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://www.rcic.com/      click on "Virtual Conference Hall,"

Reply via email to