The so call reduction in emmission does not happen all the time. There is still the possibility of resonance, this I have observed in several cases over the past 7 years .
Tim Foo, E-mail: [email protected] ECE, School of Engineering, http://www.np.edu.sg/ece/ Tel: + 65 460 6143 Ngee Ann Polytechnic, Fax: + 65 467 1730 535 Clementi Road, Singapore 599489 "Ralph Cameron" <[email protected]> To: <[email protected]> Sent by: cc: <[email protected]>, (bcc: Wan Juang owner-emc-pstc@majordom Foo/ece/staff/npnet) o.ieee.org Subject: Re: Examples of EMC problems in the real world 06/27/01 09:16 PM Please respond to "Ralph Cameron" Bob: It just occurred to me that list members may not be failimiar with the application of these components after manufacture. If needed I would be glad to elaborate. Basically, since conducted immunity also decreases conducted emissions its a double benefit. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
