Good question. Does the shipping packaging/crating even have to have CE marking or is it only the equipment, "sales" packaging, and accompanying documentation?
Bob Heller 3M Product Safety, 76-1-01 St. Paul, MN 55107-1208 Tel: 651- 778-6336 Fax: 651-778-6252 =================================================================== "Mavis, Robert" <RMavis@pelco.c To: emc-p...@ieee.org om> cc: (bcc: Robert E. Heller/US-Corporate/3M/US) Subject: 06/20/2001 09:31 AM Please respond to "Mavis, Robert" Hello Group, This question is in regards to a CE Marked assembly. The Completed end unit is CE Compliant and Marked. The end unit is disassembled and shipped in 2 shipping containers into the EU. What are the CE Marking requirements for the two shipping containers? Do we place a CE mark on both? We have only tested the unit as a whole and testing the parts separately is not typical installation or use. ------------------------------------------------ Robert L. Mavis Compliance Engineering Specialist Engineering Department, Compliance Engineering Group Pelco 3500 Pelco Way Clovis, CA 93612-5699 Phone: (559) 292-1981 x2309 Toll Free: (800) 292-1981 x2309 Fax: (559) 291-3775 email: rma...@pelco.com URL: http://www.pelco.com ------------------------------------------------- << File att1.htm not included with reply >> ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"