> ----------
> From: Andrew Wood
> Sent: 20 June 2001 13:44
> To: 'Finn, Paul'
> Subject: RE: EN50104:1998
>
> Paul,
> http://europa.eu.int/comm/enterprise/atex/guide/guide_en.pdf
>
> You might find this interesting reading.
> I think that the answer depends on whether the O2 monitor will be mounted in
> a potentially explosive atmosphere or not.
>
> The ATEX directive would not apply when measuring O2 levels in a typical
> combustion flue for instance.
>
> Best regards
> Andy.
> Andrew Wood
> Engineer (Special Products)
> Land Instruments International
>
> Own opinions only etc
>
> ----------
> From: Finn, Paul[SMTP:[email protected]]
> Reply To: Finn, Paul
> Sent: 20 June 2001 12:47
> To: 'emc-pstc'
> Subject: EN50104:1998
>
>
>
>
> Would any one be able to confirm the need to evaluate apparatus used for the
> detection and measurement of oxygen to EN 50104:1998 as part of CE marking?
>
>
>
> Your comments will be greatly appreciated.
>
>
> Paul Finn
> Panametrics, Inc
> Waltham MA
>
>
>
>
>
This e-mail and its contents may be confidential, privileged and protected
by law. Access is only authorised by the intended recipient. The contents
of this e-mail may not be disclosed to, or used by, anyone other than the
intended recipient, or stored or copied in any medium. If you are not the
intended recipient, please advise the sender immediately.
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.rcic.com/ click on "Virtual Conference Hall,"
