I think if I want to have the 1995 version with amendments A1 and A2, the only way I can find is from CENELEC, not from BSI, who will provide you with A12 and A13 on top of that.
>>> John Woodgate <[email protected]> 06/14/01 06:00am >>> <EDFA411E5E4AD2118D6F00A0C99E4BAC0386AE78@FLBOCEXU02>, [email protected] inimitably wrote: >You can find all of the official versions and amendments and their DOA, DOP >and DOW at the CENELEC web site. >http://www.cenelec.org/BASIS/celis/free/project/SF ><http://www.cenelec.org/BASIS/celis/free/project/SF> >You will find that the 2000 version has a DOW of 2004-01-01 which means that >the 1995 version and its amendments may be used until that time. However, as >you have noticed, it may be difficult to find and order the older version. >Try searching other suppliers of standards for the 1995 version if that is >the version you wish to use. Sorry, Richard, but you have been misled by the incredibly confusing situation that has been created. The '2000 version' you see on the web site will itself be superseded later this year. Until then, most manufacturers will find that using the 1995 version, with its amendments. is advantageous. It is certainly still available to order from BSI (as BS EN61000-3-2:1995), but you do have to specify the year 1995 and 'with all amendments'. -- Regards, John Woodgate, OOO - Own Opinions Only. Phone +44 (0)1268 747839 Fax +44 (0)1268 777124. http://www.jmwa.demon.co.uk Why not call a vertically- applied manulo-pedally-operated quasi-planar chernozem-penetrating and excavating implement a SPADE? ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall," ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
