Chris Feller do line cords with the C5 connector. They also do Australian plugs among others. You know that the C5 connector is only rated at 2.5A at 250V?
http://www.feller-at.com/ Chris Colgan Compliance Engineer TAG McLaren Audio Ltd The Summit, Latham Road Huntingdon, Cambs, PE29 6ZU *Tel: +44 (0)1480 415 627 *Fax: +44 (0)1480 52159 * Mailto:[email protected] * http://www.tagmclarenaudio.com > -----Original Message----- > From: Chris Maxwell [SMTP:[email protected]] > Sent: 23 May 2001 16:12 > To: 'EMC-PSTC Internet Forum' > Subject: AC connectors and Line Cords > > > Hi all, > > (I'm resending this posting, because the first one had trouble getting > through. If you receive two copies, I apologize in advance.) > > I'm looking at what I call "low profile" IEC 320 AC connectors. > Specifically, I'm looking at three pin versions which are based upon IEC > 320 > C5 (the connector on the cable) and IEC 320 C6 (the chassis inlet > connector). > > We currently use "standard" three pin IEC 320 AC inlets on our products, > and > we stock the mating cables with various flavors of wall connectors (US, > Euro, UK, Italian, Australian ...). > > We went through quite a bit of effort a few years back to identify and > specify all of the different power cables that we anticipated needing and > making sure that they had the correct safety approvals, wire type, color, > length ... It was a pain, but we're now dumb, fat and happy when it comes > to this, we can usually supply a customer with whatever line cord they > need. > > What's my question? > > Well, if we move to these "low profile" AC power inlets on our product; > what > will happen to our availability of mating line cords? I have tested the > waters with some of our line cord manufacturers with no luck. > > Does anybody have an idea of how available line cords are with the IEC 320 > C5 connector? Better yet, does anybody know a manufacturer that makes > international cordsets (especially US, Euro, UK, Italian and Australian) > with these connnectors on them? > > As always, thank you in advance for any leads. > > NOTE THE NEW EMAIL ADDRESS! > Chris Maxwell > Design Engineer > NetTest > 6 Rhoads Drive, Building 4 > Utica,NY 13502 > email: [email protected] > phone: 315-266-5128 > fax: 315-797-8024 > > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > http://www.rcic.com/ click on "Virtual Conference Hall," ************************************************************** Please visit us at www.tagmclarenaudio.com ************************************************************** The contents of this E-mail are confidential and for the exclusive use of the intended recipient. If you receive this E-mail in error, please delete it from your system immediately and notify us either by E-mail, telephone or fax. You should not copy, forward or otherwise disclose the content of the E-mail. TAG McLaren Audio Ltd The Summit, 11 Latham Road Huntingdon, Cambs, PE29 6ZU Telephone : 01480 415600 (+44 1480 415600) Facsimile : 01480 52159 (+44 1480 52159) ************************************************************** Please visit us at www.tagmclarenaudio.com ************************************************************** ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
