Hi all, The European standard EN54-7 specifies requirements and test methods for smoke detectors for use in fire alarm systems for buildings.
Chapter 5.14 is the Impact test. A swinging hammer is required to carry out the test and the following conditions applies : Impact enery = 1.9J and velocity=1.5m/s Where can I find a EU laboratory who can do this test and in addition is accredited for this specific test ? Best regards Amund Westin, Oslo/Norway -- Get your firstname@lastname email for FREE at http://Nameplanet.com/?su ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"