Mike, national deviations can be found in the CB Bulletin which is available
from the IEC. I reviewed my 1999 copy for IEC60950 + A1 + A2 + A3 + A4, but
no national deviation is listed for mains voltage or tolerance.
Richard Woods
----------
From: Davis, Mike [SMTP:[email protected]]
Sent: Tuesday, May 15, 2001 1:59 PM
To: EMC-PSTC Regulatory E-Mail (E-mail)
Subject: Japan voltage requirements
Can someone direct me to the reference's) that would lead me to a
description of the Japanese voltage requirements for safety in CB Scheme.
Michael S. Davis
Compliance Engineer
ADC BATG Compliance Engineering
Tel: 203 630-5788
Fax: 203 630-5762
[email protected]
Learn about ADC - The Broadband Company at www.adc.com
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.rcic.com/ click on "Virtual Conference Hall,"
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.rcic.com/ click on "Virtual Conference Hall,"
