Larry, Not sure if you received replies on this but the guy (or one of them) you need is as below.
Clifford Brown Account Manager Intertek Testing Services/TestMark Labs 731 Enterprise Drive Lexington, KY 40510 Voice 800-788-3061 Ext. 1029 Direct 859-226-1029 Fax 859-226-1050 E-mail [email protected] Good luck. BTW - I have just seen the Keytek EMC Pro/1089 in the recent edition of conformity. This apparently performs the Bellcore 2/10, 10/360 and 10/1000. I'm hoping to get it on demo very soon so we'll see how it performs!! Regards, Phillip Godfrey Manager, Product Safety Nemko Dallas, Inc 802 N. Kealy Ave. Lewisville. TX75057-3136 email: [email protected] Tel: (972) 436-9600 Fax: (972) 436-2667 -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Wednesday, May 02, 2001 9:47 AM To: [email protected] Subject: Compliance Design CDI-1000i plugin modules Group, Hopefully someone on this list will know whom the contact is now for Compliance Design Surge Equipment. We are looking for modules for our CDI-1000i system. Thank you in advance. Larry K. Stillings Compliance Worldwide, Inc. 357 Main Street Sandown, NH 03873 (603) 887 3903 Fax 887-6445 www.complianceworldwide.com ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
