Greetings, We are in need of safety guidance in the final design of and the specifying parts for an electronic ballast to be used in an ITE product. UL / EN 60950.
I have guided many products through UL Listing using recognized parts and supplies. But I don't have the time for any oversights and have never guided a power supply through the recognition process. This even has custom transformer and chokes. UL can't recommend a consultant but you fellows can and even recommend yourselves as the case may be. As usual this has to be completed quickly. The basic design is working but we need a review and assurance of no bumps in the UL recognition review / testing. Any recommendation or advice will be appreciated. Thanks in advance! Best regards, Terry J. Meck Senior Compliance/Test Engineer Phone:215-721-5280 Fax:215-721-5551 hard copy; Fax PC: 215.799.1650 To my desk PC [email protected] Accu-Sort Systems Inc. 511 School House Rd. Telford, PA 18969-1196 USA ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
