Hi Gary, Can you tell me the detail of your product. For EMC it will be ok for IT product to Hong Kong. However it still have to comply the safety requirement based on IEC 60950 (unless it operates less then 45V- i.e. extra low voltage) based on the EMSD regulation for the HK government.
Regards Patrick ----- Original Message ----- From: "Gary McInturff" <[email protected]> To: "Tony Reynolds" <[email protected]>; <[email protected]> Sent: Thursday, April 19, 2001 12:35 AM Subject: RE: > > If you are accredited by the FCC then I assume you have to accept data from > our accredited FCC sites as well, and there is then no requirement to test > in Hong Kong, correct? > Thanks Gary > > -----Original Message----- > From: Patrick Wong [mailto:[email protected]] > Sent: Tuesday, April 17, 2001 4:48 PM > To: Tony Reynolds; [email protected] > Subject: Re: > > > > Dear Tony, > > Hong Kong Standards and Testing Centre had been established in Hong Kong for > more than 37 years. The testing for FCC had been available since 1983. The > Electrical and EMC Dept. deal with Electrical Safety as well as EMC and FCC > since the ONLY lab in Hong Kong gain full scope of accreditations for ASTA, > CB, CNACL, CCIBLAC, DAR, HOKLAS and VCCI etc. > With our accreditations we can conduct FCC part 15 and part 18 of FCC also > we can issue TCB cert. via our network partners (4 days turnaround time). > Since we had been accredited with DAR (Germany accreditation body) our > reports, both EMC (Of course including IT products) and LVD, can help you > not only for EU but also to e.g.. Australia. > Please feel free to browse our web site in : www.hkstc.com for details and > please do not hesitate to contact us for any assistant. > > Regards > > Patrick Wong > EED > HKSTC > ----- Original Message ----- > From: "Tony Reynolds" <[email protected]> > To: <[email protected]> > Sent: Tuesday, April 17, 2001 6:58 PM > > > > > > Hi, > > > > Can anyone advise me of an EMC lab in Hong Kong capable of testing to > > the latest EU and FCC requirements for IT equipment. > > I already have details of the EMC laboratory at the Hong Kong > > Productivity Council in Kowloon, but require others. > > > > Thankyou in advance > > > > Tony Reynolds > > Pitney Bowes UK > > > > Tel +44 (0) 1279 449479 > > Fax +44 (0) 1279 449118 > > > > > > ------------------------------------------- > > This message is from the IEEE EMC Society Product Safety > > Technical Committee emc-pstc discussion list. > > > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > > > To cancel your subscription, send mail to: > > [email protected] > > with the single line: > > unsubscribe emc-pstc > > > > For help, send mail to the list administrators: > > Michael Garretson: [email protected] > > Dave Heald [email protected] > > > > For policy questions, send mail to: > > Richard Nute: [email protected] > > Jim Bacher: [email protected] > > > > All emc-pstc postings are archived and searchable on the web at: > > http://www.rcic.com/ click on "Virtual Conference Hall," > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > http://www.rcic.com/ click on "Virtual Conference Hall," > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > http://www.rcic.com/ click on "Virtual Conference Hall," ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
