When updating a declaration, as in this case, what is the accepted practice create a new Declaration with the additional standards referenced or amending the previous one. I have always created a new one. Is there any argument for one over the other?
Terry J. Meck Accu-Sort Systems Inc. >>> <[email protected]> 04/06/01 01:12PM >>> More correctly, equipment under 75W is exempt from test, but not exempt from the standard. The standard must still be listed on the Declaration. Regarding EN 61000-3-3, Clause 6.1 says, "Tests shall not be made on equipment which is unlikely to produce significant voltage fluctuations or flicker." Again, the standard must be listed on the Declaration. Richard Woods ---------- From: David Barr Sent: Friday, April 06, 2001 1:05 PM To: [email protected] Cc: [email protected]; [email protected] Subject: Re: A14 documentation Richard, In answer to the original query, I read A14 and equipment under 75W is exempt from 61000-3-2. I found no such exemption for 61000-3-3. Regards -Barr [email protected] wrote: > Mike, first of all, the use of harmonized standards is voluntary. You may > choose not to use them and find some other means to demonstrate compliance > with the essential requirements of the EMC Directive. If you choose to use > the harmonized standard, you must use the latest revision that provides the > presumption of conformity. What revision is that? It includes any and all > amendments that have a date of withdrawal (dow) that has expired. The dow > for A14 will not expire until 2004-01-01. You can find the dow in A14 and > you can also find the list of harmonized standards published in the OJ with > the dows listed. A new list was published this week. > > Check out > http://europa.eu.int/comm/enterprise/electr_equipment/emc/index.htm > <http://europa.eu.int/comm/enterprise/electr_equipment/emc/index.htm> > > Richard Woods > > ---------- > From: Mike Stone > Sent: Thursday, April 05, 2001 4:57 PM > To: [email protected] > Subject: A14 documentation > > Good Afternoon, > Are all products under 16 Amps required to be tested to A 14 of 6100-3-2 and > 6100-3-3? If so, where can I find the exact documentation that states this. > Thank you in advance. > > Best Regards, > > > Michael Stone > L. S. Compliance > W66 N220 Commerce Court > Cedarburg, WI 53012 > V 262-375-4400 > F 262-375-4248 > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > http://www.rcic.com/ click on "Virtual Conference Hall," ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall," ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
