I use an outside vendor to assemble various cable harnesses for my products. The vendor is recognized by UL and CSA and undergoes quarterly audits. I supply a drawing that specifies certain components (e.g. Connector X, Line Filter Y). However, I leave it up to them to use whatever UL/CSA recognized wire and shrink tube they have laying around. (I indicate the color, gauge, etc., but not the manufacturer or part number.)
When my product safety evaluation is performed, what documentation do I need to satisfy the UL/CSA engineer regarding the wire and shrink tube? Comments are appreciated. Paul Hare e: [email protected] Compliance Engineer w: 978.206.9179 Pirus Networks f: 978.206.9199 43 Nagog Park c: 508.450.0376 Acton, MA 01720 i: www.pirus.com ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
