Hi Peter, It depends on the configurations of your products. Since the Japan safety law is going to be changed from April 1, 2001. My understanding is that the ITE power supply (Category A products) shall obtain the PSE-mark approval. With the aid of CB report will be helpful to shorten the testing time.
As for EMC, it's suggested to get voluntary VCCI approval increasing the market acceptance. As for PTT of Telecom Equipment, you should get the JATE approval. Regards, Anderson -----Original Message----- From: Peter Merguerian [mailto:[email protected]] Sent: Tuesday, March 13, 2001 3:37 PM To: "EMC-PSTC (E-mail)" < Cc: Ilan Cohen Subject: ITE/Telecom Equipment for Japan Dear All, For an ITE or Telecom Equipment with UL Listing and TUV Rheinland GS Marks only, rated properly (100-230V), and Intended for Japan: 1. Will the equipment be accepted without any additional tests? 2. Will the equipment be accepted without a CB Test Report? 3. Are the Japanese deviations to IEC 950 mandatory or can equipment be imported with the UL and TUV GS Marks only? I would appreciate any experiences many of you have had with exports of ITE/Telecom equipment to Japan and the new regulatory requirements there. Peter Merguerian Managing Director Product Testing Division I.T.L. (Product Testing) Ltd. Hacharoshet 26, POB 211 Or Yehuda 60251, Israel Tel: 972-3-5339022 Fax: 972-3-5339019 e-mail: [email protected] website: http://www.itl.co.il TO LEARN ABOUT AUSTRALIAN AND NEW ZEALAND REQUIREMENTS, CONTACT ME AT THE EARLIEST STAGES OF YOUR DESIGN; REQUIREMENTS CAN BE TRICKY! ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall," ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
