Hi all, Regarding RTTE and the NB role, we have this case:
1. Product: Satellite transmitter/reveicer, KU-band (10-14GHz) 2. Harmonized standards exist As far as I understand, we do not need a NB for certification. Apply annex III and issue a DoC. If the product shall be put into marked in EU countries, which the KU-band is "not harmonized", a statement must be forwarded to the national authorities that the product soon will be introduced to the marked. Wait 4 weeks, no responds, you can go on selling. Am I right or am I totally ........ ? The last one, any WEB-site that describes the Harmonized Frequency bands ? Best regards Amund Westin On Tue, 27 Feb 2001 15:55:15 -0500 [email protected] wrote: > >A representative is necessary if the manufacture is not resident in the EU. >That entity keeps the technical file and performs any other duties expressly >assigned by the manufacturer. This procedure is not related to any >procedural requirements to use or not use a Notified Body. A Notified Body >is needed if Annex III, IV or V applies. For example, our product is a short >range device where the spectrum standard has not been published; so we must >follow Annex IV and use a Notified Body. However, once the standard is >harmonized, we will switch to following Annex III and a Notified Body will >not be required. > >Richard Woods > >---------- >From: Courtland Thomas [SMTP:[email protected]] >Sent: Tuesday, February 27, 2001 5:07 PM >To: emcpost >Subject: RTTE Directive > > >Hello group, > >I have been reading through different articles on the RTTE Directive and >getting somewhat confused. I have concluded that there is no requirement for >an authorized representative within the Community any longer. This may have >been the case all along, but it was good to have that person to submit the >technical files to a notified body. I believe the notified body requirement >goes away with the RTTE directive also. Now all that is required is for the >manufacturer to maintain the technical file and produce the Declaration of >Conformity. Am I on the right page? > >Thanks, > >Courtland Thomas >Patton Electronics > > >------------------------------------------- >This message is from the IEEE EMC Society Product Safety >Technical Committee emc-pstc discussion list. > >Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > >To cancel your subscription, send mail to: > [email protected] >with the single line: > unsubscribe emc-pstc > >For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > >For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > >All emc-pstc postings are archived and searchable on the web at: > http://www.rcic.com/ click on "Virtual Conference Hall," > >------------------------------------------- >This message is from the IEEE EMC Society Product Safety >Technical Committee emc-pstc discussion list. > >Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > >To cancel your subscription, send mail to: > [email protected] >with the single line: > unsubscribe emc-pstc > >For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > >For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > >All emc-pstc postings are archived and searchable on the web at: > http://www.rcic.com/ click on "Virtual Conference Hall," > > -- Get your firstname@lastname email for FREE at http://Nameplanet.com/?su ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
