Hello Zohar, Try CISPR 24 (or EN 55024 for CE marking) CISPR 24, Table 2 - Immunity, signal ports and telecommunication ports, 1.5 kV Common mode for outdoor cables, 4 kV if primary protection is installed. 10/700 pulse. EN 55024, Table 2 - Immunity, signal ports and telecommunication ports, 1 kV Common mode for outdoor cables, note if normal functioning canot be achieved because of the impact of the CDN on the EUT, no test shall be required. 1.2/50 pulse. Best regards
Helge Knudsen Test and Approval Niros Telecommunication A/S Denmark [email protected] ---------- From: Zohar Zosmanovich[SMTP:[email protected]] Reply To: Zohar Zosmanovich Sent: mandag, januar 29, 2001 10:31 To: '[email protected]' Subject: Ethernet 100Base-T Hi to all, I need some help in finding surge requirements for Outdoor Ethernet 100Base-T line (except from what described in EN 300 386). The Ethernet line connected between inside building and outside. I will appreciate any input regarding this subject. I'm trying to get the IEEE 802.3U. Is that the right source ? Thank Zohar (Jana) Zosmanovich Compliance Engineer, RADWIN ltd. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
