The IEC standard is IEC127 which has requirements for Very Fast, Fast, Delay, Long Delay and M (Medium?) along with breaking current capacity codes.
"Davis, Mike" <[email protected]> on 01/25/2001 11:08:33 AM Please respond to "Davis, Mike" <[email protected]> To: "EMC-PSTC Regulatory E-Mail (E-mail)" <[email protected]> cc: (bcc: John Merrill/Aut/Schneider) Subject: Fuse Markings I am in the process of updating markings for power ratings on a product that needs a marking for a FAST blow fuse. Is there a reference out there that shows the letter designations for the various blow open speeds? I looked in the IEC 417 and in UL1950 3rd edition to no avail. The search goes on. Michael S. Davis Compliance Engineer ADC BATG Compliance Engineering Tel: 203 630-5788 Fax: 203 630-5762 [email protected] Learn about ADC - The Broadband Company at www.adc.com ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
