Shouldn't that be 1KV as for the telecommunication port, which running parallel in the same outdoor cable ?
Zohar (Jana) Zosmanovich Compliance Engineer, RADWIN ltd. 34 Habarzel St., Tel Aviv 69710, Israel Tel.: 972-3-7666735 ; Fax: 972-3-7657535 Email: <mailto:[email protected]> -----Original Message----- From: Anil Allamaneni [mailto:[email protected]] Sent: Tuesday, January 09, 2001 7:29 PM To: Zohar Zosmanovich Subject: RE: Surge for DC power port Hi Zohar, If testing to EN55024, you need 500V on the DC port If testing to ETS300386 (the Europeon NEBS), you need nothing for DC ports. Anil -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Zohar Zosmanovich Sent: Tuesday, January 09, 2001 6:00 AM To: '[email protected]' Subject: Surge for DC power port Hi to all, I have a unit (Radio Terminal) which being installed outdoors and its supply voltage (-48Vdc) and Telecom/Data lines running in same cable. What kind of surge need to be apply on the DC power port ? Thanks, Zohar (Jana) Zosmanovich Compliance Engineer, RADWIN ltd. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
