Hello everyone,
I am currently trying to test a product of ours that falls under 50082-1
generic standard for light industrial equipment. Our problem is that we
have a 24VAC power input port. The generic standard calls out for EN
61000-4-5 on AC power input ports. After looking at EN 61000-4-5 it seems
that it is intended for AC mains voltages, but I couldn't find anything that
says a 24VAC input is exempt from this test. I am looking for outside
opinions on whether this test is truly applicable.
Thanks,
Jennifer Banh
BTW, we already tried just testing to the spec, and failed. Any suggestions
on how to protect against this test would also be appreciated.
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
No longer online until our new server is brought online and the old
messages are imported into the new server.
