Look at http://www.iso.ch/iso/en/stdsdevelopment/tc/tclist/TechnicalCommitteeStandar dsListPage.TechnicalCommitteeStandardsList?COMMID=1993
-----Ursprüngliche Nachricht----- Von: Boonstra, Tim [mailto:[email protected]] Gesendet: Mittwoch, 12. Dezember 2001 17:24 An: Major Domo (E-mail) Betreff: ISO 1043-1 to 1043-4 Gentlemen, Can anyone provide info about ISO 1043. We have been asked by a Swedish entity to mark the plastic parts in our product per ISO 1043-1 thru 1043-4. Regards, Tim Tim Boonstra Manager of Supplier Quality Benchmark Storage Innovations ? 3122 Sterling Circle Boulder Colorado 80301 ph: 720-406-5103 Fax: 720-406-5071 ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
