Check out http://www.indiansources.com/vvcl.htm and see if it's their symbol.
Cortland Richmond (Not my employer's opinion; my own!) "Summers, Chet" wrote: > Hello Group, a colleague has asked me to identify the mfg marking stamped on > a metal surface mount fuse. Looks like a small "V" with another inverted > "V" placed directly on top in "interlocking" fashion. The UL rep has asked > us to identify this manufacturer. The fuse is installed on a purchased PCB. > The symbol seems familiar, but I cannot place it. > > Also, the engineer charged with identifying this part says he used to know a > website where someone had compiled a useful list of manufacturer's component > logos/symbols. Any guidance would be much appreciated! > > Chet w/Pelco ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
