I read in !emc-pstc that [email protected] wrote (in <[email protected]>) about 'Stepping receiver, step sizes.', on Thu, 6 Dec 2001: >We are performing radiated emissions testing in a semi-anechoic chamber >using an EMI receiver. We plan to cover a high frequency range between 1 >and 5 GHz (a large spanse to cover!). I would like to know what practical >step size (ie. 8kHz or 20kHz or 80kHz) I could choose for such a wide >range and keep:
What is the bandwidth of your receiver? Provided your step is not greater than the bandwidth, your receiver will not miss any emissions. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk After swimming across the Hellespont, I felt like a Hero. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
