Perhaps you should provide some details such as expected load, frequency
range and so on. One should expect that one's choice of equipment and
manufacturer will be different if one is shaking a military tank, than
if one is shaking a small electronic module, for example.

Bob Wilson
TIR Systems Ltd.
Vancouver.

-----Original Message-----
From: Wani, Vijay (V) [mailto:vw...@dow.com] 
Sent: June 17, 2002 1:48 PM
To: 'emc-p...@majordomo.ieee.org'
Subject: vibration test system


hello Group:
I am planing to buy vibration / shock test system for our lab. and
basically, looking for Vibration Research, Ling Dynamic System (LDS) and
Unholtz Dickie Corp. for the system (electrodynamic shaker, controller,
analyzer). I would appreciate any input / recommendation / experience on
vibration test system for their performance.

thank you in advance.

vijay wani
(989)636-0473 

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

Reply via email to