Hi All,
Mutual inductance can be a powerful debugging tool for problem circuits.
It can also be either a friend or foe in the designs themselves. This
month's Technical Tidbit at http://www.dsmith.org relates direct
measurement of Ldi/dt voltage drop with Mdi/dt of the same voltage.
Often direct measurement of a voltage drop is not possible. This article
shows that Ldi/dt and Mdi/dt measurements can be equivalent. Yet another
use for a probe made out of a paperclip!
Doug
--
-------------------------------------------------------
___ _ Doug Smith
\ / ) P.O. Box 1457
========= Los Gatos, CA 95031-1457
_ / \ / \ _ TEL/FAX: 408-356-4186/358-3799
/ /\ \ ] / /\ \ Mobile: 408-858-4528
| q-----( ) | o | Email: [email protected]
\ _ / ] \ _ / Website: http://www.dsmith.org
-------------------------------------------------------
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on "browse" and then "emc-pstc mailing list"
