Due to a recent round of layoffs I'm now looking for a new position. If anyone has a lead on an EMC or Compliance engineering position please contact me at either [email protected] or 858-526-7263. My Resume is included below for your reference.
Thanks, Jason Greenwood Jason Greenwood 536 Shadywood Dr. Escondido, CA 92026 (760) 233-0682 [email protected] Education: * Bachelor of Science in Electrical Engineering, Co-operative Program 1996 University of Alberta Edmonton, AB * Masters of Business Administration 1999-Present Heriot-Watt University Edinburgh, Scotland * Additional Courses - Attended Henry Ott Consulting Seminars on EMC on two occasions, 1998 and 2000 - Training on UL 1950, 1997 - Various internal Nortel training courses on Wireless and internet technologies - Various internal Cisco training courses on internet technologies Career Experience: Ensemble Communications San Diego, CA Aug. 2001 - Present Compliance Engineer * As the only Compliance Engineer, I was responsible for all compliance activities. * Reviewed designs and provided EMC and Safety input at both the PCB and system level. * Performed FCC Part 101 and ETSI EN 301-213 radio testing for BWA equipment. * Responsible for investigating requirements and obtaining approvals for countries requested by sales and marketing. * Scheduled and tracked all compliance testing. * Wrote EMC test plans for testing at outside labs. * Resolved any issues that arose during testing. * Reported to sales and marketing on the status of all approval activities on a weekly basis. * Coordinated all aspects of obtaining UL and TUV safety certifications. * Created and Maintained CE mark technical construction files. Cisco Systems Boulder, CO Aug. 2000 - Aug. 2001 EMC Compliance Engineer * Provided EMC design input at both the PCB and system level. * Scheduled and tracked all compliance and design verification testing. * Worked with suppliers to resolve issues relating to their subassemblies. * Responsible for obtaining all country approvals required by marketing. * Coordinated testing at outside labs. * Resolved EMC issues that surfaced during testing. * Mentored junior EMC personnel in the areas of EMC design and trouble shooting techniques. * Performed initial product safety reviews of PCBs and systems. * Coordinated formal safety reviews and testing. Nortel Networks Calgary, AB Jan.1998 - Aug 2000 EMC/Radio Engineer * Worked with PCB and Mechanical designers to ensure that the system EMC requirements were met. * Used EMC experience and product knowledge to provide risk assessments on cost reductions and other design changes. * Performed emissions, immunity and radio testing in accordance with various standards including: FCC part 15, CISPR22, Bellcore GR-1089-CORE, FCC Part 22/24. * Wrote test reports for testing completed. * Mentored junior EMC personnel. * Developed test procedures and test set-ups for use in our EMC lab. * Trouble shot issues that arose in the EMC lab. * Chaired EMC group meetings. Nortel Networks Calgary, AB Sept. 1996 - Jan 1998 Regulatory Factory Engineer * Reviewed design changes for impact to Safety, EMC, mechanical and thermal performance. * Performed audits of our products on a regular basis to ensure that they remained in compliance with the UL Follow up service agreement. * Supported UL/CSA during their quarterly inspections. * Developed the processes necessary to maintain regulatory compliance on our products in manufacturing. * Developed strategies to address problems that occurred in manufacturing or the field. * Provided mentoring to my replacement as I transitioned into my role as an EMC/Radio Engineer. Nortel Networks Calgary, AB Sept. 1995 - Jan. 1996 Product Integrity Co-op Student * Tested telecommunication equipment according to FCC Part 68 and Industry Canada CS03 standards. * Assisted with FCC and Industry Canada submissions for new products. * Ensured that our products met the safety requirements of the European Community (EN60950). * Sent sample of products to various independent labs for testing. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
