1) I believe someone out there commented on using the HP 74XX series
analyzer for pre-compliance measurements. Do you also use the additional
software that can be purchased?
The unit I played with had no additional software, but I could make
measurements against limits lines etc, and it factored in the transceiver
gains/losses and then allowed me to export a summary sheet for any reports I
wanted to generate. What functions and value does the additional software bring
to the table.?
2) Does anybody out there get any traction from a "Letters of
accession" that the FDA sends to a optics vendor after receiving a request for
a model addition?
This letter says nothing useful for NRTL's and always includes "This
acknowledgement does not constitute approval or the document".
The FEDS are disavowing any level of conformity assessment, and the
NRTL's I use tell me they can't use it, even for an unrecognized componet, yet
the vendors are insistent that I am the only unaccepting curmudgeon in the
entire universe.
Sorry if you've heard this before but I just can't believe it keeps
happening, and that tells me that I should double check my facts.
Thanks
Gary
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on "browse" and then "emc-pstc mailing list"
