I need to use an isolating device between a sip/sop and an applied part (BF) requiring 1500V isolation (Basic(250)). I plan on using a digital isolator, but the component does not have IEC601 approval. The component does have 2500V isolation and 8 mm creepage.
Questions: 1) When our product is submitted for IEC601 certification, how does the use of the non 601 approved part affect the investigation? 2) Does the investigator need the schematic for that component? What if the schematic is not available? 3) If the component already has other approvals (UL1950 or UL1577). How does this affect the approval process? Thanks in advance. [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
