Hi all, Recently, I have read quite a few threads regarding EN 55022 (European Emissions Limits for ITE equipment) and its newer requirements to measure signal line conducted emissions along with the typical power line conducted emissions.
This caused me to go back and look at EN 61326-1:1998 (European EMC specs for Lab, Test and Measurement equipment) According to my copy of EN 61326-1, conducted emissions limits are only specified for "AC Mains". So apparantly, test and measurement equipment hasn't had this requirement placed upon it....yet. Does anybody know of any in-process amendments to EN 61326-1 that would add signal line conducted emissions? If so, is there any expectation of when the amendment is due to be processed? Thanks, Chris Maxwell | Design Engineer - Optical Division email [email protected] | dir +1 315 266 5128 | fax +1 315 797 8024 NetTest | 6 Rhoads Drive, Utica, NY 13502 | USA web www.nettest.com | tel +1 315 797 4449 | ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
