Hi Group,

I am about to embark on a Global (I decided Europe, North America and
Australasia and handle others as required) Approvals requirement on several
of our products, a small (60VA power reqt) electronic terminal with an
analogue modem. I outlined my requirements to my local Test House that I
normally use but was astounded at the costs for each of the individual
items. I stopped and had a serious re-think on my strategy. 
I have listed the Standards I would want the product approved to and then
tried to short cut the amount of tests required. I would appreciate comments
on any particular area of your own expertise. I am sure this forum has had
similar scenarios.

Again, I appreciate the input of this forum. THANKS!

Safety Requirements
EN60950 (CE)
UL 60950 (USA)
CSA 22.2 60950 (Canada)
AS/NZS 3260 
AS TS 001 (NZ?)
NOM019 (Mexico)

My "summarized" Safety Requirements
IEC 60950-1:2001 CB route (change to AS/NZS 60950)
TS001 (Aus and NZ?)
UL and or CSA application only, via the NRTL route using the CB report.
NOM019

EMC Requirements
EN55022 (CE)
EN55024 (CE)
EN61000-3-2 and -3 (CE)
FCC Pt 15 (USA)
ICES-003 (Canada)
AS/NZS 3548

My "summarized" EMC Requirements
EN55022 (use ANSI procedures for 120V and 230V, self declare CE, AS/NZS
accept?)
EN55024
EN61000-3-2 and -3 (No test, small power product, no SMPS, wouldn't fail,
just self declare)


Analogue Modem Requirements
TBR21 + EG 201 121 (voluntary)
FCC Pt 68 (USA)
IC-03 (Canada)
TS002 (Aus)
PTC 200 (NZ)

My "summarized" Analogue Modem Requirements
TBR21 + EG 201 121 (Europe)
FCC Pt 68 (Mexico and Canada acceptance?)
TS002 (Australasia, no PTC 200?)


Kind Regards
Alex McNeil
Principal Engineer
Tel: +44 (0)131 479 8375
Fax: +44 (0)131 479 8321
email: [email protected]


-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

Reply via email to