Ravinder The IEC standard for microwave ovens is IEC 60335-2-25, this allows a maximum leakage of 50W/m2 at 50mm or more from the external surface of the microwave oven. I tested a few of these a few years ago and found levels well below the above limit even at closer than 50mm. I am sure that the models I tested will have been superceded a long time ago, this cannot be applied to any specific samples available now. The manufacturers may be able to give you some idea of measurements.
Best regards Glenn Moffat TUV International UK Tel: +44 121 634 8000 Fax: +44 121 634 8080 ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
