Hello Richard, All, Does anybody know know of any labs or companies looking to get rid of some ferrite tiles/panels?
Judy Johnson ----- Original Message ----- From: <[email protected]> To: <[email protected]> Sent: Tuesday, September 17, 2002 8:24 AM Subject: RE: EMC Chamber Relocation > > Jeff, we moved our chamber several times and had someone different do it > each time based upon lowest quote. Some of your panels could be accidentally > damaged during the move. We had some panels starting to separate due to > moisture. Most were salvageable, however. Also, we found some corroded parts > that needs to be replaced. We buffed up some panels and some frame members > and reused them since we did not need more than 80 db isolation from our > chamber which is about what we got afterwards. If you need more issolation, > plan on replacing the corroded parts. We moved the chamber for about $4K. > > Now for the disaster story. We moved a compact immumity chamber. We > contracted through a familiar company from whom we purchased the chamber and > test equipment - a turn key installation. That company contacted the move to > the chamber manufacturer. The move went well, but the recallibration did > not. It is now 6 months later and the chamber is still out of calibration > with all three parties squabling. I don't recommend going this route. > > Richard Woods > Sensormatic Electronics > Tyco International > > > -----Original Message----- > From: Collins, Jeffrey [mailto:[email protected]] > Sent: Monday, September 16, 2002 3:10 PM > To: [email protected] > Subject: EMC Chamber Relocation > > > > Hello Group, > > > We are considering relocating our 3 meter EMC chamber. Can you: > > * Recommend a company that is proficient at this and will work in the Bay > Area ( San Jose / San Francisco CA) > > * Give estimated costs > > * Share things to watch out for > > * Things you would do different the next time. > > * Give your experiences/opinion on Relocating chambers vs. Building a new > one > > > > Thanks, > > > Jeffrey Collins > Sr. HW Engineering Manager > EMC/ NEBS/ Reliability/ Safety > CIENA Core Switching Division > 10480 Ridgeview Court, Cupertino, CA. 95014 > (408) 366-4806, Fax (408) 366-4867 > [email protected] > http://www.ciena.com > > > > > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: [email protected] > Dave Heald: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > http://ieeepstc.mindcruiser.com/ > Click on "browse" and then "emc-pstc mailing list" > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: [email protected] > Dave Heald: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > http://ieeepstc.mindcruiser.com/ > Click on "browse" and then "emc-pstc mailing list" > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
