Ken, I had one of these amps too. I think it was called the M-400. This little cube put out an amazing 200 W/ch and weighed just over a pound.
I remembered seeing the lights in the house dim and flash whenever a good bass transient came along. The unit employed a power transformer with multiple taps that are quickly switched in and out depending on signal power requirements. --------------------------------------------------------------------- Dan Kwok, P.Eng. Principal Engineer Electromagnetic Compatibility Intetron Consulting, Inc. Ph (604) 432-9874 E-mail [email protected] Internet http://www.intetron.com ----- Original Message ----- From: "Ken Javor" <[email protected]> To: "Doug McKean" <[email protected]>; "EMC-PSTC Discussion Group" <[email protected]> Sent: Wednesday, December 11, 2002 8:36 PM Subject: Re: Importance of EMC > > Many years ago, I had a Carver Cube 200 Watt per channel amplifier. It > performed some kind of switching. When I turned it on, I had no AM > reception whatsoever. > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
