Flexible circuit boards have been used in standard and hi-rel circuits successfully for at least two decades or more!
--- Brodie Pedersen <[email protected]> wrote: > > > I have a design team looking at using a bendable circuit board in order > for a certain fit in a plastic housing. Do any of you have information > on reliablity, pitfalls, experiences with this type of circuit board > implementation. Your help and suggestion will be greatly appreciated. > Thanks in advance > > Brodie Pedersen > QA Engineer > Nonin Medical Inc. > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: [email protected] > Dave Heald: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > http://ieeepstc.mindcruiser.com/ > Click on "browse" and then "emc-pstc mailing list" ===== Best Regards Hans T. Mellberg, Consultant Regulatory, High Speed, EMC and Power Design Services By the Pacific Coast next to Silicon Valley, Santa Cruz, CA, USA office:831-454-9450, cell:408-507-9694, fax:831-454-0755 BSEE, NARTE Certified Engineer, IEEE, AIAA, dB 2004 IEEE EMC Symposium Program Chair, IEEE EMC SCV ADCOM __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
