Folks
Due to a facility closings I need a plan within two weeks to remove a 32 ft by 38 ft by 10 ft anechoic EMC testing chamber which is currently installed, calibrated and accredited in CA. I also have a 14 ft by 24 ft by 10 ft 10 ft anechoic EMC testing chamber which is currently in storage in MA from a previous facility closing. Please contact John Freudenberg directly at [email protected] if you have any ideas. Thanks Paul S ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
