When are testing a FCC Part 15 intentional radiator operating below 30 MHz, and have encountered the situation where the emissions from the antenna is being received by the power cord and causing the system to fail conducted limits. The transmitter complies with the conducted limits with a dummy antenna load. The transmitter has a detachable antenna and a 12 ft antenna cable. Is it permissible to demonstrate compliance with the conducted limits by 1) using a dummy antenna load, or 2) placing the antenna outside the chamber, or 3) some other way? Obviously, whatever method we use must be acceptable to the FCC.
Richard Woods Sensormatic Electronics Tyco International ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
