Ghery,
Ken,

I think they were called "micro-Q" ... I am not sure if they are being produced 
any more. Last time I saw one was about 5 years ago or so. The pins were 
designated to correspond with Vcc and logic common.

You may want to contact Circuit Components Inc. which was identified in the 
below article: 
http://www.devicelink.com/mpmn/archive/98/04/case.html

Good luck.

Kurt Fischer

-----Original Message-----
From: Pettit, Ghery [mailto:ghery.pet...@intel.com]
Sent: Wednesday, December 04, 2002 4:34 PM
To: 'Ken Javor'; emc-p...@majordomo.ieee.org
Subject: RE: capacitor filter inserts for electrical connectors



Ken,

I found a similar product on page 179 of the 2002 ITEM made by Metatech.  Is
this what you're looking for?

Ghery Pettit


-----Original Message-----
From: Ken Javor [mailto:ken.ja...@emccompliance.com]
Sent: Wednesday, December 04, 2002 4:08 PM
To: emc-p...@majordomo.ieee.org
Subject: capacitor filter inserts for electrical connectors



Members:

I am looking for manufacturers of capacitor filter inserts that are pushed
into pre-existing connectors and provide capacitance from selected pins
through a ground plane included in the insert to the connector shell.  I
think TRW developed these a number of years ago and called them microdiscs,
or something similar, but I cannot find anything on the web, nor in the back
of my ITEM.

Any assistance would be appreciated.

Ken Javor

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

Reply via email to