Group Does anybody know if there is correlation between IEEE 1100 section 3.5 and any of the tests within the EN61000-4-x range? It has been suggested that the IEEE 1100 test and EN61000-4-4 (fast transient testing) were related. The information I have about section 3.5 of the IEEE document indicated it is concerned with power supply failures. Is the document mandatory in any countries or is it an "industry standard"? Thanks Ian Gordon
_____________________________________________________________________ This e-mail has been scanned for viruses by the WorldCom Internet Managed Scanning Service - powered by MessageLabs. For further information visit http://www.worldcom.com ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
