Andy, Tecknit has shielding solutions for windows. I believe that they offer wire mesh screens as well as Indium Tin Oxide (ITO) coatings. Note that ITO is great for dissipating ESD; but I am uncertain about its utility as a radiated emissions shield. It's surface resistivity is relatively high (something like 14 Ohms/Square Inch). It has been about 6 years since I have dealt with them; but the catalog that I have has a phone number of 44-1476-590600 listed for Europe.
Chris Maxwell | Design Engineer - Optical Division email chris.maxw...@nettest.com | dir +1 315 266 5128 | fax +1 315 797 8024 NetTest | 6 Rhoads Drive, Utica, NY 13502 | USA web www.nettest.com | tel +1 315 797 4449 | > -----Original Message----- > From: Alan E Hutley [SMTP:nutwoo...@nutwood.eu.com] > Sent: Wednesday, August 14, 2002 7:55 AM > To: andrew.p.pr...@baesystems.com; emc-p...@majordomo.ieee.org > Subject: Re: EMI Coatings for Windows > > > Andy, try Instrument Plastics in Maidenhead UK. Mike Wevill +44 (0) 1628 > 770018. > Cheers > Alan E Hutley > EMC Compliance Journal > www.compliance-club.com > > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"