Hi Brian,

Get distilled water at any grocery store.
I'm not sure about the methylated spirit, but I was able to get hexane from
VWR Scientific www.vwrsplcom .  Please note that any reagent grade will
satisfy, but the cheapest is the way to go.  One liter will last a lifetime,
about $15 usd.

Please note that, to obtain this material you must offer the supplier your
employer's Federal EPA number.

Oddly enough, I was years ago directed by my field engineer at UL NBK, to
use WD-40 to perform the permanency test.  Later on somebody tightened the
sphincter and would not accept my test data, so I was forced to purchase
hexane and use it and water for all tests (60950).  All results were the
same.

Best Regards,
Kyle
(USA)


----- Original Message -----
From: "Brian McAuliffe" <[email protected]>
To: "Emc-Pstc Post" <[email protected]>
Sent: Tuesday, August 13, 2002 3:07 AM
Subject: solutions for markings durability test


>
> can anybody recommend a one-stop source for the solutions (in small
volumes)
> called out in 60950,61010,60601 and 60335 for the durability of required
> markings tests i.e.
>
> 1. Distilled water
> 2. Methylated spirit
> 3. Isopropyl alcohol
> 4. Aliphatic Solvent Hexane, having a maximum aromatics content of 0.1% by
> volume, a kauri-butanol value of 29, an initial boiling point of
> approximatley 65 degC, a dry point of approximately 69 degC and a mass
> perunit volume of approximately 0.7 kg/l.
>
> thanks
> brian
>
>
>
>
> ============================================
> PLEASE NOTE CHANGE OF ADDRESS & NEW WEB-SITE
>
> Brian McAuliffe
>
> MCA Compliance Solutions Ltd
> Unit 2 Lissane Business Park|Clarecastle|Co.Clare|Ireland
>
> w: www.mcac.ie
> e: [email protected]
> t: +353 (0)65 6823452
> m: +353 (0)87 2352554
>
>
> -------------------------------------------
> This message is from the IEEE EMC Society Product Safety
> Technical Committee emc-pstc discussion list.
>
> Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/
>
> To cancel your subscription, send mail to:
>      [email protected]
> with the single line:
>      unsubscribe emc-pstc
>
> For help, send mail to the list administrators:
>      Ron Pickard:              [email protected]
>      Dave Heald:               [email protected]
>
> For policy questions, send mail to:
>      Richard Nute:           [email protected]
>      Jim Bacher:             [email protected]
>
> All emc-pstc postings are archived and searchable on the web at:
>     http://ieeepstc.mindcruiser.com/
>     Click on "browse" and then "emc-pstc mailing list"


-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

Reply via email to