When I worked on CATV power supplies I had two reasons for using magnetic;
1. Nuisance tripping of thermal breakers during high ambient temperatures 2. Magnetic breakers often carry a higher level of safety rating (UL Listed vs UL Recognized)than thermal and have higher short circuit maximum ratings. Darrell Locke Advanced Input Devices -----Original Message----- From: David Heald [mailto:[email protected]] Sent: Wednesday, August 07, 2002 8:18 AM To: 'EMC_PSTC' Subject: Thermal breakers vs magnetic breakers for telecom Greetings all, In the spirit of the continual quest for cost reduction, I have been asked to look into the use of thermal circuit breakers instead of magnetic ones. It seems like we rejected thermal breakers before for some reason, but now no one can remember why. Does anyone know of any telecom (or general) reasons why thermal circuit breakers may be unacceptable for telecom products? Thanks and Best Regards, Dave Heald ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
